Main Components

l Uncoil of Aluminum Strips

Inner Diameter:Φ300mm

Outer Diameter :≦Φ1500mm

Width:20.5—70mm

Uncoil Speed: Controllable of 100 to 150 meter per minute,

            With Strip Brake Equipment.

2 Roll forming and Molding

Wall Thickness: 0.20 to 0.35mm(adjustable)

Aluminum spacer Sizes: 5.5mm to 26.5mm;

Roll-Forming and double-row perforation;

12 sets of Horizontal Gantry Molding rack to finish roll forming and punching;

Guider Pillar adjustment mold is adopted to increase the accuracy and stability.

Distinct and well-distributed Logo could be printed every 800mm according to customers’ requirements.

3 HF Welding

Techniques: US Thermtool Induction Welding

Speed: 100 to 150 meter / minute

Welder:High Frequency Solid State Induction Welder 100-0.45-H

Cooling System: Inner Water Cycling by refrigerator

4 Scraper, Sizing, Straightening

Scraper to remove the burrs after welding

Aluminum Particles Sucking during scraping

6 Roller rack to size, straighten and adjust the form of Spacer Bar

5 Flying Saw Cutting

The automatic cutting work is controlled by computer. The length and size of the spacer was measured by the measuring wheel with encoder; Once the computer receives the pulse signal from the encoder, he will make the cutting action.

Sizing Ruler Precision:≦2mm;

The product will be pushed by the air pressure with no harm and automatically.