Model Number: WX151018M Key Specifications/Special Features: Baseball cap made from 100% polyesterSize: approx. 18cm diameter, 12cm depth. Beak to be approx. 18cm width, 7.5cm depth excluding the curves.The cap will have a differently coloured beak to the main section.6 panels stitched together; each of the panels is to have a hole punched into them which is then to be strengthened by means of stitching all around the hole.At the centre of the cap there is a fabric covered button with a metal pin.Inside of the cap to have a folded over and stitched band around the edges made of 100% polyester material, colour to match the cap.The joints of the panels inside are covered by polyester tapes.The inside front two panels of the cap to have a white lining inside.Velcro for adjusting the size at the back.A white thin plastic care label to be stitched into the inside. 35mm x 60mm folded in half. 2 colour print on one side.Embroidered logo on front 2 panels, 2 - 3 colours, maximum 6,000 stitches.Packaging: bulk packed in cartons.